跳到正文
Hacker News (official RSS)(spacex.com)·· 14 天前品質評分70

SpaceX 預計以 Starship Flight 15 嘗試回收捕獲 Starship 與 Super Heavy

SpaceX catches the Starship to end Flight 15

重點導讀

SpaceX 計畫在 Starship Flight 15 中,首次嘗試讓 Starship 與 Super Heavy 都返回發射場並由塔架捕獲,任務仍待監管核准,發射時間可能變動。

  • 任務目標:Super Heavy V3 將執行發射、級間分離、返回點火與發射場捕獲;Starship 預計部署 26 顆 Starlink V3 衛星,並嘗試返回 Starbase 捕獲。
  • 飛行計畫:Starship 預計在約 275 km 高度繞地球約 14 圈,飛行超過 22 小時。若要返回發射場,飛控團隊須先確認再入、最終著陸點火與塔架接近所需系統狀態正常。
  • 熱盾檢查:部分衛星搭載相機,將掃描 Starship 熱盾並回傳影像;熱盾也採用 Flight 14 的改良,包括加強瓷磚固定、處理電漿流入瓷磚後方的區域,以及使用曲面瓷磚。

AI 伴隨問答

自備 Key 深度分析

針對這篇報導有疑問?可直接點選快捷問題或向 AI 追問背景脈絡與技術細節:

正文

Flight 15 of Starship is preparing to launch as soon as Friday, November 13, pending regulatory approval. The 75-minute launch window will open at 4:45 p.m. CT.

A live webcast of the flight will begin about 30 minutes before liftoff, which you can watch here and on X @SpaceX. Coverage is planned to continue through ship catch, with the potential for hours of live views from Starship as it orbits Earth, powered by Starlink. As is the case with all launches, the schedule is dynamic and likely to change, so be sure to check in here and stay tuned to our X account for updates.

The upcoming flight is planned to be the first to return both Starship and Super Heavy to the launch site for catch. If successful, this will mark the first full recovery of an orbital launch system and a breakthrough moment in making Starship a reliable, rapidly reusable rocket.

Starship’s initial return to launch site mission is expected to orbit the Earth at an altitude of ~275 km and complete approximately 14 orbits around the planet over the course of a more than 22-hour flight. Similar to Starship’s first orbital mission, the flight profile has been designed with the opportunity to insert into a passively safe suborbital trajectory or safely deorbit at multiple pre-determined areas over the ocean after raising to an orbital altitude. Read more about the testing, mission design, and safety measures for first planned Starship catch.

Starship’s previous mission was the culmination of more than a dozen flight tests and years of development, sending Starship to orbit and deploying meaningful payloads to space for the first time. Watch “Go For Orbit”, the latest episode in the ongoing Starship series experience the moments behind flying the most ambitious Starship mission yet.

The booster’s primary objective on Flight 15 will be executing a successful launch, ascent, stage separation, boostback burn, and return to the launch site for catch. This will be the first return and catch attempt for a Super Heavy V3 booster. Three V1 boosters were successfully caught on earlier flight tests with two demonstrating successful reflights.

The Starship upper stage’s primary objectives include the deployment of 26 Starlink V3 satellites and the first return to launch site and catch at Starbase. Starship will only execute a return to launch site if the flight control team has ensured that the vehicle systems critical for reentry maneuvers and final landing burn and tower approach are healthy.

Starship will deliver 26 Starlink V3 satellites to orbit, which aim to greatly expand the network's capacity and user speeds. Each Starlink V3 satellite will add 1 Terabit of capacity to the constellation, with all 26 satellites equaling ~10 Starlink V2 Mini launches on Falcon 9.

After deploying from Starship, the Starlink V3 satellites will unfold their antennas and deploy their solar arrays and make initial contact with the ground and the rest of the Starlink constellation via radio frequency and laser links. The satellites will then begin raising their orbits with their onboard thrusters. Following their on-orbit checkouts, the satellites should begin serving customers as soon as a few weeks after launch.

Three of the satellites have been modified with a suite of cameras to scan Starship’s heatshield and transmit imagery down to operators. This method of analyzing Starship’s heatshield has been tested on previous flights and is one of several data sources to help inform Starship’s readiness to return to the launch site on Flight 15.

Starship’s heatshield will incorporate the improvements made on Flight 14 including additional retention mechanisms on tiles in areas deemed to be at highest risk of falling off during ascent and addressing areas with a flow path for plasma to get behind the tiles. The vehicle will also have a large portion of the heatshield equipped with a curved tile design that has shown the ability to reduce heating in the gaps between tiles.

讀者討論

理性交流 · 即時討論